NineT Tail Tidy TRON LED BAR with detailed pics
Here is what I did to my bike so far...
1. Fabricated a side mount license bracket
2. Removed the reflectors from the fork
3. Shaved down the 2 strap hangers under the passenger seat
4. Fabricated an exhaust bracket
5. IMOLA bar end mirrors
and today I spent a few hours in the garage and installed a LED bar.
This LED bar is awesome... It is bright even in daylight. the entire bar is a running light and a brake light. The LED bar also has amber lights and is used for blinkers. This one tiny unit does it all!!!
So here is what I did... (See pics for reference)
A: I removed the factory light assembly and snipped the wires. There are 5 wires Brake/running lights, Left turn, Right turn, Ground, License plate light.
B: I snipped the wires under driver seat
C: I installed a female 6 pin connector to the wires under driver seat
D: Mounted the CHROME GLOW LED bar (part# 4801-172S) to the Seat Cowl using a heat gun to help mold the contour of the cowl and then drilled a small hole to feed the wires through.
E: Installed the Male 6 pin connector to the Seat cowl wiring
F: Installed the seat cowl and plugged in the 6 pin connector
And that's about it...
Next I will build a setup for the passenger seat and install another male 6 pin connector so I can take a rider with no hassles.
And lastly I will fabricate a lighting setup for the BOBBER style with only a SOLO Seat.