BMW NineT Forum banner

Electro Operated Servos For Exhaust Note Enhancement

3342 Views 8 Replies 6 Participants Last post by  street
I'm assuming this feature is controlled by the ECU and not the rider.
1 - 2 of 9 Posts
so what happens if you swap the entire exhaust, you have to ride with an error code always? Couldn't I just get Motorrad to shut it off?
It's fine cherry street just remove the cables from the control box as there not required once the valves removed from the exhaust join union ,it's only if you remove the servo box the ECU will show up a fault on the dash ,save your funds for petrol not giving it to a technician to swipe your ECU if it can be done :confused:;):D hope this makes sense :)
thanks Bose, I've had a bit of history with BMW cars and remember that if you wanted anything done it hand to be at with the BMW tekkies. Things are so electronically complicated you need an engineering degree to remove the engine cover ;)
1 - 2 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.