Very nice writeup! Kudos for sticking with the project, it looks great on the bike and I'm sure it sounds awesome.
Installing chinese titanium exhaust on UGS
Your Mission , should you accept it:
Install the Ali Express Titanium Exhaust on the UGS. It comes in 3 Parts and you just need to bolt the headers on, slip the pipes together and get the springs on (tricky).
Now that can't be hard, right?!
Well, There are a few more parts than promised in the ad...
![Fluid Cylinder Gas Nickel Auto part]()
![Liquid Fluid Finger Gas Thumb]()
And they do not fit together.....
![Machine tool Tool Gas Composite material Engineering]()
Was nicht passt, wird passend gemacht.
![Wood Floor Flooring Gas Cylinder]()
It nearly looks like in the advertising now haha.
![Wood Security Lock Padlock Gas]()
Lets not forget , we had to do a lot of this to make it fit...
![Automotive tire Motor vehicle Vehicle Tread Tire]()
Just when you think you overcome all the problems....
![Motor vehicle Hood Automotive tire Automotive exterior Automotive lighting]()
And another one, its touching the breast cover ...
![Automotive tire Tread Tire Wheel Motor vehicle]()
Would I buy one again?? F... maybe. Not really. The work involved outweighs the cost.......
![Tire Wheel Vehicle Automotive tire Motor vehicle]()
Did I make it work? Yes. But ..........
![Tire Wheel Vehicle Automotive lighting Automotive tire]()
It is VERY loud now with my open GP exhaust . Do I love it? YES.
- Was it worth it? - NO get a proper exhaust, not the Ali EXpress copy.
Cheers, Sash
P.S. I also had to modify the crash bars as the O2 sensor in the new exhaust was touching on one side.
I have not yet re fitted my bash plate, it will need modifications as it touches the link pipe in the front and the Y at the rear ... So if you have accessories' on your bike, be aware that the new exhaust is not 100% like the original and might interfere ....
Install the Ali Express Titanium Exhaust on the UGS. It comes in 3 Parts and you just need to bolt the headers on, slip the pipes together and get the springs on (tricky).
Now that can't be hard, right?!
Well, There are a few more parts than promised in the ad...
And they do not fit together.....
Was nicht passt, wird passend gemacht.
Just when you think you overcome all the problems....
And another one, its touching the breast cover ...
Would I buy one again?? F... maybe. Not really. The work involved outweighs the cost.......
Did I make it work? Yes. But ..........
It is VERY loud now with my open GP exhaust . Do I love it? YES.
- Was it worth it? - NO get a proper exhaust, not the Ali EXpress copy.
Cheers, Sash
P.S. I also had to modify the crash bars as the O2 sensor in the new exhaust was touching on one side.
I have not yet re fitted my bash plate, it will need modifications as it touches the link pipe in the front and the Y at the rear ... So if you have accessories' on your bike, be aware that the new exhaust is not 100% like the original and might interfere ....
1 - 9 of 9 Posts
I admire your tenacity and patience! Thanks for the post! 
These are available in various styles and sizes from Alchemy Parts in the UK. Had them on my last two bikes simply to offer some protection against impact damage to the expensive LED headlights. Very simple to fit.
HEADLIGHT GRILLS - Alchemy Parts
None whatsoever.
Attachments
1 - 9 of 9 Posts
