BMW NineT Forum banner

1 - 3 of 3 Posts

·
Registered
2019 BMW Scrambler
Joined
·
33 Posts
Heres some photos I received when I emailed them for help. Shots of the resistor, the unplugging of the OEM wire harness and the underside mounting.
Screenshot 2020-10-16 115221.png Screenshot 2020-10-16 115245.png unnamed(4).jpg unnamed(3).jpg unnamed(2).jpg

I wired in the resistor slightly different, working fine for me, no errors on the display:
2020-06-21 20.44.41.jpg
 

·
Registered
Joined
·
4 Posts
Discussion Starter #3
Heres some photos I received when I emailed them for help. Shots of the resistor, the unplugging of the OEM wire harness and the underside mounting.
View attachment 136738 View attachment 136739 View attachment 136740 View attachment 136741 View attachment 136742

I wired in the resistor slightly different, working fine for me, no errors on the display:
View attachment 136743
Great, thanks a lot. This is much more than I got from DK. Once I realized I was holding the unit upside down, I was able to figure it out.


Sent from my iPhone using Tapatalk
 
1 - 3 of 3 Posts
Top