BMW NineT Forum banner

Oil Temperature Gauge on OEM display

24739 Views 65 Replies 29 Participants Last post by  roadrunner
I seems the oil temperature readout has been removed from the instrument display. I want to add a gauge, just for my peace of mind. Since most other R models have this incorporated in the stock instrument, I presume I can get a stock sender unit that will go in some existing fitting on the engine? Any one know where it is located? Then I just have to find a display that will blend in with the existing instruments. Or just replace everything with the incredible Motogadget stuff!

Thanks for any info.

1 - 1 of 66 Posts
I'd imagine you would have to drill into somewhere to install the sensor.

Run the wire into the front and find somewhere to put the gauge.

Not impossible.
1 - 1 of 66 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.