BMW NineT Forum banner
1 - 20 of 20 Posts

· Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
Hi Troops, from Port Glasgow Scotland, I have Just Puchased an R9T 8 ball custom, after watching y/tube hidden stuff, there is meant to be an Optimate plug in wire tucked behind left side downtube for footrest mount, Mine just seems to have wires going to Exhaust cat, Does anyone know if ther is another charge point for Optimate.Thanks for any help.!!(y)(y)(y):cool:
 

· Premium Member
Itinerate Jackass
Joined
·
2,403 Posts
Welcoming you. Congratulations on your new bike and welcome to the forum. If you can't find one, wouldn't hurt to install a couple pigtails, maybe one coax and one standard fit you battery charger.
 

· Registered
Joined
·
2 Posts
Discussion Starter · #7 ·
Hello Kenny

I'm not a million miles away (or is that 500 miles) but installing a pigtail down at the back of the bike is pretty easy, you can use the Jump start terminal (under the seat) for the positive and one of the screws next to it for an earth.

I don't know about your model, my 2017 Racer was kitted out as @Chris. described
Cheers Guys I,ll probably just fit the Optimate pigtail under the seat,with the frost and salt on the roads might be a few more weeks before iget it out. Regards Kenny.
 

· Registered
Joined
·
300 Posts
Cheers Guys I,ll probably just fit the Optimate pigtail under the seat,with the frost and salt on the roads might be a few more weeks before iget it out. Regards Kenny.
If you need any pics I can take some for you, should you need..........not trying to teach ma granny!!

Tell me about the fekin weather, it's either freezing or pouring down
 

· Super Moderator
2014 Classic
Joined
·
5,733 Posts

· Premium Member
Joined
·
3,595 Posts
Howdy from Texas and Welcome to the mix. Share stores, trade laughs and make friends … it’s easy, you already have one 🙋🏼‍♂️ me. Take some picts of your world and your bike and post often …………. BeWell and StayUpOn2 Mate …………………………………………. Blitz
 

· Registered
Joined
·
8 Posts
Hi Kenny I own a 2018 R9T classic with a blue 8 ball custom paint scheme.I use the factory fitted socket which is located above the left hand cylinder fixed to frame this is linked to an optimate 4 "Can-bus" edition charger.This arrangement removes additional leads elsewhere on the bike.
 

· Registered
2017 R9T Scrambler
Joined
·
32 Posts
Enjoy the rides through the spectacularly beautiful highlands!

Can’t wait to go back to Scotland. A two week visit wasn’t nearly enough. Absolutely fell in love with the people and places.
 
1 - 20 of 20 Posts
Top