BMW NineT Forum banner

1 - 8 of 8 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter #1
Can someone from the members of this forum provide me with this measurements for R NineT with 55mm USD forks?

A - I need mostly spacing(A) between forks. I think it is 207mm or 207.5mm?
B - Offset(B) - I found on internet it is 35.5mm or even 37mm ?
D -.. And hole diameter(D) where stem goes. 28.5mm?

And did this number changed over the model years ?

I would really appreciate the help!


127255
 

·
Registered
Joined
·
6 Posts
Discussion Starter #2
I need help from forum members

if somebody can confirm me or give me next measurements for models with upside down forks. I need it for top triple tree.

A - fork center distance . I measured 207mm?
B - offset . I measured it 37mm?
D - stem hole diameter 28mm?

I need to send measurements to overseas comapny that will make me custom top triple tree.

Also does anybody knows if later models have different geometry and if let say B - offset changed. Maybe I will make several pieces but I would like to know will it fit later models.


127329
 

·
Registered
Joined
·
445 Posts
It might be worth sending the fellas at Daedalus an email.
They have designed one of their own as part of their "clip ons", and might be willing to share accurate measurements with you.
 

·
Registered
Joined
·
6 Posts
Discussion Starter #5
I removed triple tree and did measurement. Triple tree has part number 8 538 052 so it is for older models.

Fork center distance is 207mm and offset is 37mm... stem hole is 28mm(28.1mm)

but for newer models there is some difference ?
 

·
Registered
Joined
·
6 Posts
Discussion Starter #7
yes 207mm 37mm and 28mm are correct measurements for early models. Still waiting for someone to give me for later models 2016-
 
1 - 8 of 8 Posts
Top