BMW NineT Forum banner

R nineT Tourer

5898 Views 32 Replies 14 Participants Last post by  Tigcraft
Well I’ve finally started on my R9 Tourer build. Hard luggage first after the center stand fit.

Fuel tank Automotive fuel system Tire Wheel Motor vehicle

Tire Wheel Fuel tank Motor vehicle Vehicle

Motor vehicle Gas Automotive tire Engineering Auto part

Vehicle Car Motor vehicle Tire Automotive tire

Tire Wheel Motor vehicle Automotive lighting Automotive tire

Tire Wheel Vehicle Motorcycle Automotive tire

Tire Wheel Bicycle tire Automotive tire Automotive lighting

Wood Gas Automotive exterior Auto part Bumper

I’m going with Shad SH36 cases but I’ve to make the mounts as there’s no fitting kit available. I’ve fitted a ‘scrap’ rear subframe in case I wreck the good one and if needed I can weld onto it. It takes a bit of setting up to get a ‘zero’ point to work from but I’ve got one now. The bike will need a similar rear seat making to the front in shape to go with the look. That’s it for today folks! 😉
See less See more
  • Like
Reactions: 3
1 - 3 of 33 Posts
Looking good, the rear footrests can't be used when the pannier frames on mine are loaded, no problem for me as I tour solo...

  • Like
Reactions: 1
Shad consider the R Nine T to be a cafe racer, so the won't be developing full luggage for the bikes.
Shame that, thought you might have made some cash there...
I think ridercam would like a template of your construction so he can make some himself..

1 - 3 of 33 Posts