Can't help you with pics of the fork stem mount. But I have the handlebar mount and though the quad lock is an excellent way of securing your phone, you're actually pretty limited as to where it can go on the handlebars. I settled with it as seen below with the arm in the 9 o'clock position but it does make it difficult to get the key in when my phone is attached. It was either that or obscure a dial with the arm in the 12 o'clock position or have my phone hit the tank in the 6 o'clock position. Due to the shape of the handlebars and the size of the reservoirs, the clamp won't go anywhere other than just either side of the centre handlebar clamp.

Anyway, just my advice on this particular mount! Best of luck and good luck with the new bike.

 

What size bar mount did you use? 28 mm?

Another happy and satisfied Quadlock customer here. The handlebar stem mount works really well. I know what you mean about the vibrations but I've never noticed any issues. I did quickly relaise that my polarizerd sunnies mean I can't have the phone in landscape though. Strange one.

What size did you use? 28 mm?

 

I recently added the stem mount on my bike, but I'm running clip-ons and this was the only mount that was suitable for me. I don't know if the stem mount would fit under a standard handlebar (im thinking not), but at the very least you'd need to remove the bars to install it.

I think it comes down to if you have clip-ons or a standard bar:

• Clip-ons = fork mount
• Handlebar = bar mount.

Hope this helps. You can also see the vibration dampener installed on mine. Quadlock recently released this after a lot of reports of vibrations killing the optical image stabilisation motors on modern smartphones. As for if it works.. time will tell. I'd rather not destroy my phone camera so I'll give it a go. Excuse the messy garage- I'm in the middle of renovations and it's a mess!

 

Thanks a ton for all the information!! I get the difference between the clip ons and the stock handlebar now. Thanks for the pictures!!
Based on Quad Lock’s website, I too decided to go with the vibration dampening kit as it states that the R9T vibration isn’t good for the phone.

 

The quad lock system is super slick. I think you’ll be happy with your purchase.

 

Wow, I just bought the handle bar mount at the exact moment that you posted your comment 😂

 

Another happy and satisfied Quadlock customer here. The handlebar stem mount works really well. I know what you mean about the vibrations but I've never noticed any issues. I did quickly relaise that my polarizerd sunnies mean I can't have the phone in landscape though. Strange one.

 

My handle bar Mount came with a few different spacers and I have tried it mounted near the thickest part of the standard bars and moved it up next to the clutch master, where the bars are thinner. Both work fine, I just used a different spacer.

 

I mounted mine on the mirror stem using a ram mount, you do have to have the mirrors on the bar ends to do this…

 

I have been using the Quadlock system for several years now on the RNT.
You will definitely want the vibration dampener: I destroyed an 11 without it.

 

Does this quad lock mount work with any Gamin units?

 

You can get a universal (stick on) holder that you can stick on every kind of phone/tablet to fit on to the quadlock holder, so you can use that on a Garmin unit with the quadlock.

 

Thank you for posing this question. I am a new owner of a RNineT 100th anniversary edition. The comments by everyone in here helped greatly. I chatted with someone live from Quad Lock online before I purchased and even sent him photos of the mount area to let me know which would suit it best. I went wit the NEW Handle Bar Clamp Mount with Vibration Dampener and the Wireless Mount. It should take 1-2 days to arrive. After which I will have it installed and take some pictures and upload them here to hopefully help others who come here for the best solution for themselves. Below is a picture of what it looks like. Stay tuned for the final product.

 

I'm also considering the brake reservoir mount for my rNineT - any thoughts? Will post pics if it works ok.

Trying to keep the handlebars clean and the phone not in the way of the instruments. Mine is a 100 year edition with the handlebar mirrors.

Thanks,
Jordan

 

What spacer are you using for the handlebar mount? With the 1 1/8" spacer (28.6mm), I can't close the unit. The thinnest (1 1/4") overlaps and is too thin. I must be doing something wrong.